• Register

What settings should be used when imaging floppy disks using a Kryoflux device?

+1 vote
1,514 views

I'm trying to write a small program to identify floppy disk formats automatically in order to enable efficient bulk disk imaging. 

Details of the approach are outlined here.

As part of this I need the program to create every possible variant of disk image in order to test each to find out which type of disk it actually was. 

For this to work I need to know what possible types of disk there might have been. For example, double sided disks, single sided disks, disks that should be read at 300rpm, disks with 40 tracks, disks with 80 tracks, etc. 

I will be using the Kryoflux device to do this work and the settings options within that include:

  1. Image Type
  2. Start Track
  3. End Track
  4. Side Mode
  5. Sector Size
  6. Sector Count
  7. Track Distance
  8. Target RPM
  9. Track physical position - side 0
  10. Track physical position - side 1
  11. Start track
  12. End track
  13. Flippy/not flippy
  14. Output Image Track Order
  15. Disk Density

I don't have a lot of knowledge of disk formats however and so am hoping that others will know what settings I should include in the program. For example, are there other RPM that disks were read at aside from 300 and 360? Also, Are there any standard sector counts? (etc). 

I have started a spreadsheet to capture options here. I do not want to circumvent the use of this site so can you please give any answers you can on this site and in the spreadsheet also if possible. I will ensure that any that are only posted on this site are consolidated in the spreadsheet and included in the program. 

 

asked Jul 21, 2014 by euanc (3,930 points)
edited Jul 21, 2014 by euanc
I should have looked at that! perfect thanks
feel free to add that as an answer

1 Answer

+1 vote
Wikipedia already has what appears to be a comprehensive list of both physical and logical floppy disk formats.

It's worth noting that while 300 and 360 rpm will get you quite far, there are exceptions. For example, Amiga 1760 KB floppies were 150 rpm, the Atari 8-bit 5¼" used 288 rpm, and old Apple systems were notorious for using different forms of variable rotation speed (for example Apple II 3½", Apple Lisa, and Macintosh double-density disks).

If you have more data, or know of floppy disk formats not listed in Wikipedia's table, I would encourage you to amend the table on Wikipedia, with relevant citations.
answered Jul 21, 2014 by michael (400 points)
This was a great start thanks. I'm adding some more settings to the question and spreadsheet which the wikipedia page doesn't answer though.

Also Jason Scott linked to this http://digitize.textfiles.com/items/1983-maxell-catalog/.m/1983-maxell-catalog-10.jpg which describes another format not mentioned on the wikipedia page.
...